Recruit a Machinist/Engineer here... Enter the details below of the vacancy you have, these will  automatically appear in the scroll box below for all to see, potential  candidates will then contact you directly, good luck.
Name:
Company:
Email:
Location:
Details:	Include details on skill requirement, package, hours etc...
Spam Code:	5919103
Enter:

Submit your info to find a job.... If you're looking for work or just interested to see what is available out there, fill in the form below, none of your details will be publicised below just your skill set, potential employers will then contact you via email, you can then choose if you wish to respond, good luck.
Name:
Email:
Location:
Travel Radius:
CV / Exp:	Inc details on your skills, experience and work required
Spam Code:	5919103
Enter:

Below details employment opportunities entered above:

Date:	13 April 2012
Company:	SJB Precision Engineering Ltd
Details:	We are looking for a fully skilled Fanuc CNC Turner for programming and setting. To work under own initiative in a rapidly expanding precision engineering company. Hours: Mon-Fri Full time plus overtime. Salary/Hourly rate: negotiated depending on skills and experience.
To find out more about this opportunity:

Date:	15 February 2012
Company:	Machining Technology Ltd
Details:	JOB TITLE: CNC PROGRAMMING ENGINEER - MILLING SALARY £14/HOUR, 37 HOURS A WEEK WITH OVERTIME AT 1.33%. IMMEDIATE VACANCY FOR A COMPETENT AND ACCOMPLISHED ENGINEER. MAIN PURPOSE OF JOB: TO PRODUCE AND PROVIDE PART PROGRAMS, SETTING INFORMATION AND TOOLING TO THE SHOP FLOOR AND MANAGE THE TECHNIQUES AND EQUIPMENT USED TO ENABLE EFFECTIVE CHANGEOVER FROM ONE JOB TO THE NEXT. JOB REQUIREMENTS: 1) A HIGH DEGREE OF EXPERIENCE AND SKILL PROGRAMMING AND SETTING CNC PLANT AND CREATING PART PROGRAMS AND METHODOLOGY ON CNC MILLS. 2) A HIGH DEGREE OF EXPERIENCE WITH HAAS MACHINERY OR FANUC CODE. 3) A HIGH DEGREE OF EXPERIENCE WITH EDGECAM 2011/12. 4) USED TO WORKING IN A VARIETY OF MATERIALS AND OFTEN TO TIGHT TOLERANCES. 5) TO BE ABLE TO USE INITIATIVE IN THE TASK’S UNDERTAKEN. 6) POSITIVE, COURTEOUS AND FLEXIBLE MANNER NEEDED FOR WORKING WITH OUR POSITIVE, COURTIOUS AND FLEXIBLE TEAM. 7) PLAN AND SPECIFY TOOLING REQUIREMENT FOR PRODUCTION, INCLUDING FIXTURE AND CUTTING TOOL LIST. 8) TO ENSURE THAT PLANNING AND EFFICIENCY IS PARAMOUNT IN THE CNC SECTIONS.
To find out more about this opportunity:

Date:	18 January 2012
Company:	Hewitt & Topham Ltd
Details:	We are a long established (1938) precision engineering company based in Keighley, West Yorkshire. Manufacturing bespoke gears from 6mm diameter to 2.4 metre diameter to OEM's and Endusers throughout the UK, and Europe CNC / Manual Turner Ideally the applicant will be time served and from a precision engineering background. Preferably possess basic editing skills using Phillips controls, and have the ability to work from engineering drawings. They must also be capable to operate manual lathes. Experience of Dean Smith & Grace CNC Lathes (phillip controls), Colchester Mastiff, Lang Gap Bed and a Webster Bennett 54" chuck manual lathes would be advantageous. Hours 38 Hours Per Week, Monday To Friday, 08:00~12:30 13:00~16:30 Mon - Tues 08:00~12:30 13:00~17:00 Weds - Thurs 08:00~13:00 Fri O/T x 1 1/3 Mon - Thurs x 1 1/2 Fri pm, Sat Wage £8.57 PER HOUR - 12 weeks trial / training period, may reduce trial period for correct applicant) £9.53 per Hour – after satisfacory trial period A Time keeping bonus is paid weekly, currently £16 / week (42p/hr) and bi-yearly Profit sharing scheme is paid after a set qualifying period has been reached. The Profit sharing scheme is depandant on company performance and therefore not guarrenteed. 2011 totall payment £400/employee.
To find out more about this opportunity:

Date:	05 November 2011
Company:	Ryetools limited
Details:	TOOLMAKERS NEEDED. Ryetools based in N.Yorks have permanent vacancies for mould toolmakers. Experience of high quality complex mould assembly needed including grinding or cnc. Days only with flexable hours. Clean modern workshop and very interesting work. Very stable company offering possible re-location assistance to live in a very desirable area of UK - clean air, good schools ect ect. Regular, but optional overtime allways available, boosting earnings to £40k pa.
To find out more about this opportunity:

Date:	12 October 2011
Company:	Norbar Torque Tools Limited
Details:	Norbar Torque Tools Ltd., the world leading torque tool manufacturer, is continuing to expand its CNC facility and has vacancies for fully qualified CNC Setters to work a variety of shift patterns within our busy machine shop. Duties will include the setting and running of CNC machine tools including turning and machining centres. Maintaining total quality of products, working in project teams and involvement in continuous improvement activities are all part of the job. Familiarity with Fanuc ISO based CNC controls is desirable. An ONC or City and Guilds/NVQ 2-3 in Mechanical Engineering would also be a distinct advantage. Norbar also offers a non-guaranteed profit related bonus, contributory pension scheme, life assurance and an award winning canteen. Some assistance will be considered towards relocation.
To find out more about this opportunity:

Date:	06 October 2011
Company:	Assystem
Details:	Skilled CNC Machinist/Programmers wanted for both contract and permanent opportunites. Weekend shifts available plus over time offering competitive hourly rates. Must be fully conversant with programming Mazak/Mazatrol turning systems or setting and operating with Heidenhain Milling systems.
To find out more about this opportunity:

Date:	30 September 2011
Company:	Newmax Precision Ltd
Details:	We are looking for skilled CNC turners, programmers & setter / operators. To work in a sub-contract enviroment using CNC lathes with FANUC controls. Hours: Mon-Fri, full time, Day/night shift. Hours, Salary/hourly rate: to be negotiated, depending on experience.
To find out more about this opportunity:

Date:	06 September 2011
Company:	Tamicare Ltd
Details:	Looking for engineer to operate manual and cnc milling machines with experience with Heidenhain controls. Also, manual lathe skills would be an advantage.
To find out more about this opportunity:

Date:	04 September 2011
Company:	Hi-Spec Precision Engineering
Details:	We are an established family business who have recently expanded into new premises. We have a number of positions available. All are full time permanent positions, working a 40 hour week, 20 days annual holiday + bank holidays. Hourly rates stated below are for guidance and will be dependant on experience and are open to negotiation CNC Turner - Minimum requirement is for a setter/operator using a range of modern multi-axis Colchester Tornados on both bar feed and chucking work. Controls are Fanuc & utilise conversational programming. Programming training can be given should the applicant wish to progress further within the role. Hourly rate around £8.50-£9 CNC Miller - Minimum requirement is for a Setter/Operator using either a Haas Mini Mill or Hurco VM1 machining centre. Programming training can be given should the applicant wish to progress further within the role. Hourly rate around £8.50-£9 Goods In/Stores Person - Role will include all aspects of goods in & out, material handling, operation of bandsaw and circular saw machines and all of the support services required to help the production departments run smoothly. Hourly rate around £7-£8 General Manual Machinist - To operate a range of manual machinery including Universal and turret milling machines, centre lathes, capstan lathes and other manual equipment to complete low volume production and in house fixture/tooling manufacture. Hourly rate around £8-£9 In all roles experience is required Situated in Rutland near Oakham Contact us on 01572 768036
To find out more about this opportunity:

Date:	19 July 2011
Company:	Brabow engineering company Ltd
Details:	Looking for a full time Inspector . Responsible for first off & final inspection / Gauge control. Must be able to work on your own initiative & operate CMM. Farranti Metrology system with IMS Dos control. We have a full range of inspection equipment & gauges at your disposal.We offer : * 39 HR + Over time (When available) * 25 Days Holiday + 8 Statuary * Private Health cover + spouse & family (Under 21) * Company pension. * Salary Negotiable.
To find out more about this opportunity:

Date:	16 July 2011
Company:	Oxton Engineering Co Ltd
Details:	CNC turner required must be time served. 38hr wk Plus overtime. Hourly rate £12.15/hr
To find out more about this opportunity:

Date:	20 June 2011
Company:	Plastim Limited
Details:	Looking a machinist to join our growing team. Basic skill level would be someone who is able to operate CNC machines, ideally turning machines. We are looking for someone who is happy to do shift work either part time or full time. Shift hours would be 15H00 to 23H30. Monday to Thursday working 32 hours and being paid 40 hours.
To find out more about this opportunity:

Date:	17 June 2011
Company:	Robinson Instruments Machining (RIM) Ltd
Details:	CNC Miller (Programmer/Setter/Operator) required for busy family run Company in the west country producing high precision parts for various industries including own product ranges. (Motorpsort/Aerospace/Defence). Top rates of pay for the right candidate.
To find out more about this opportunity:

Date:	18 May 2011
Company:	Brass Products Ltd
Details:	A CNC Machinist is required to join a small manufacturing company in Kent. The candidate should have working knowledge of Fanuc CNC machines and be able to demonstrate this. Usual working hours are between 8am and 6pm (exact hours dependent on current workload), some Saturday overtime is available. Salary is negotiable and for the right candidate we are prepared to help with relocation costs if necessary.
To find out more about this opportunity:

Date:	12 May 2011
Company:	Crown Precision Engineering
Details:	Required both CNC Millers & CNC Turners, must be conversant with Heidenhain & Fanuc controls and able to programme the most complex jobs. We have vacancies on both a fixed early shift (6-10) and fixed late shift (2-10 inc. a shift rate). Tel: 01908 376080.
To find out more about this opportunity:

Date:	09 May 2011
Company:	Olney Precision Ltd
Details:	Due to continued growth Olney precision Ltd are now looking to further strengthen our CNC machining department by recruiting additional setter/operators. Candidates who have experience setting and operating CNC milling and turning centres particularly Fanuc control are urged to apply. Experience of high precision small batch production would be an advantage as would the completion of a recognised mechanical engineering apprenticeship. Candidates will be expected to work on their own initiative to high quality standards. Olney precision is a long established family owned business offering competitive rates of pay and excellent benefits.
To find out more about this opportunity:

Date:	05 May 2011
Company:	Norbar Torque Tools Limited
Details:	CNC Setters Norbar Torque Tools Ltd., the world leading torque tool manufacturer, is continuing to expand its CNC facility and has vacancies for fully qualified CNC Setters to work a variety of shift patterns within our busy machine shop. Duties will include the setting and running of CNC machine tools including turning and machining centres. Maintaining total quality of products, working in project teams and involvement in continuous improvement activities are all part of the job. Familiarity with Fanuc ISO based CNC controls is desirable. An ONC or City and Guilds/NVQ 2-3 in Mechanical Engineering would also be a distinct advantage. In return for a 38½ hour week, we can offer a starting hourly rate of £12.69 rising to £13.35 after a period of training plus shift premium (if applicable), contributory pension scheme, non guaranteed profit related bonus and award winning canteen.
To find out more about this opportunity:

Date:	30 April 2011
Company:	Gnutti India PowerTrain & castings pvt ltd
Details:	Include details on skill requirement, package, hours etc...
To find out more about this opportunity:

Date:	15 April 2011
Company:	Cowie Technology Group Ltd
Details:	CNC TURNER / SETTER / PROGRAMMER We are looking for a dynamic and experienced CNC Turner Programmer / Setter to join our rapidly growing company which specialises in the design and manufacture precision PTFE products which are sold into a variety of industries world-wide including scientific, pharmaceutical and aerospace. Working as part of a team, the CNC Programmer / Setter is responsible for the effective programming and setting of a range of CNC lathes to produce quality PTFE products and components. As well as original programming work, they will also be required to recommend and implement improvements to existing programs and manufacturing methods with a view to maximising efficiency and effectiveness. The successful applicant will be a time-served turner machinist with proven CNC programming and setting experience in a precision manufacturing operation. A commitment to continuous improvement and experience in Fanuc based CNC control systems is essential. Knowledge of milling (manual and CNC) would be an advantage. A permanent position with a growing company is on offer along with excellent rates of pay. Circa. £10 - £12 per hour depending upon experience and qualifications (negotiable). Hours of Work: Monday to Thursday 8am to 5pm Friday 8am to 2pm (40Hrs/Week) Full Uniform Provided Please email recruit@cowie.com with full CV and salary requirements.
To find out more about this opportunity:

Date:	24 March 2011
Company:	Unilathe Ltd
Details:	CNC Machine Tool Maintenance Engineer. Mechanical and electrical experience of CNC machine tool maintenance is essential for this position. This role will work along side our exiting maintenance team, to further enhance the technical approach to CNC breakdown and establish a preventative maintenance system for a broad range of CNC machine tools. This is a day shift position. Day Shift. Monday to Thursday 8am - 4:30pm, Friday 8am - 3:30pm, with flexible week and weekend overtime offered. Mr M Oakley mark.oakley@unilathe.co.uk Or alternatively contact us on 01782 532000 for more information. nclude details on skill requirement, package, hours etc...
To find out more about this opportunity:

Date:	24 March 2011
Company:	Unilathe Ltd
Details:	CNC machining centre operators, setters and programmers for both day and night shifts. Operators for both Horizontal and Vertical machining centre's, familiarity with either Fanuc, Siemens and Heidenhain controls would be a clear advantage. CNC Turning operators, setters and programmers for both day and night shifts. Monday to Thursday 8am - 4:30pm, Friday 8am - 3:30pm, with flexible week and weekend overtime offered. Night Shift Monday to Thursday 8:30pm - 7:00am with flexible week and weekend overtime offered. In return we offer a permanent role with competitive pay (according to experience), together with an option for regular overtime. Please feel free to post or email your current C.V addressed to Mr M Oakley mark.oakley@unilathe.co.uk Or alternatively contact us on 01782 532000 for more information.
To find out more about this opportunity:

Date:	17 March 2011
Company:	Peter Jones Engineering Ltd
Details:	PJE is looking for a Fanuc CNC Mill programmer setter operator. You need to be time served with all the experience necessary to take a job from drawing to completion. The successful applicant will need show there relevant experience and have excellent knowledge in tool ion and use as well as full G code programming, you should have a eye to quality and be proud of the work you produce. Ideally we are looking for a person with the ability to lead that team and control workflow on our 8 VMC's. Peter Jones Engineering is a sub contract company that produces a wide range of varied work, typically in batches from 1 to 200, in a wide range of materials, we have been in business for over 42 years. We work a 39 hour week and overtime, your hourly rate will be based on your experiance. No agency or contractors, please apply by email only to hi@peterjoneseng.com, position is immidiate and permanent.
To find out more about this opportunity:

Date:	09 March 2011
Company:	Anderson Engineering
Details:	we have the position for a cnc miller programmer/operator rates 10.30/hr 39 hr week plus o/t permanent postion
To find out more about this opportunity:

Date:	08 March 2011
Company:	Tml Precision Engineering Ltd.
Details:	CNC Miller / programmer / setter required for busy AS9100 aerospace certified precision engineering workshop. Any applicants must be fully conversant with G code programming and have experience with Fanuc or A2100 controls. Any experience with CAD/CAM, Heidenhain, 5 axis Matsuura / DMG Evo type machines would be a clear advantage. Competitive rates of pay and flexible working available for the right person. Circa £25-£40K days. This is a permanent position. Must have UK working Visa, No contractors, No Agencies.
To find out more about this opportunity:

Date:	08 March 2011
Company:	Tml Precision Engineering Ltd.
Details:	CNC Turner / programmer / setter required for busy AS9100 aerospace certified precision engineering workshop. Any applicants must be fully conversant with G code programming and have experience with Fanuc controls. Any experience with CAD/CAM, Mazak Integrex, Puma MX, driven tools and sub spindle type machines would be a clear advantage. Competitive rates of pay and flexible working available for the right person. Circa £25-£40K days This is a permanent position. Must have UK working Visa, No contractors, No Agencies.
To find out more about this opportunity:

Date:	28 February 2011
Company:	MRT Castings Ltd
Details:	CNC Turning Setter Operator Prior experience of CNC Turning, and programming in Fanuc are essential. The successful candidate will be responsible for programming all new components on our CNC Turning Centre, and operating the machine for ongoing production work. Components worked on vary from machining of aluminium die castings produced in-house for electronics / marine / defence applications, to stainless steel bar and billet work for high quality components for the lighting industry. Basic 38 hours/week, weekly paid, with good overtime opportunities, and productivity bonus. 25 days annual holiday + bank holidays Comprehensive in-house training programme Friendly team. Stable family-run business established for over 60 years.
To find out more about this opportunity:

Date:	26 February 2011
Company:	RYETOOLS LIMITED
Details:	TOOLMAKERS NEEDED. Ryetools based in N.Yorks have permanent vacancies for mould toolmakers. Experience of high quality complex mould assembly needed including grinding or cnc. Days only with flexable hours. Clean modern workshop and very interesting work. Very stable company offering possible re-location assistance to live in a very desirable area of UK - clean air, good schools ect ect. Regular, but optional overtime allways available, boosting earnings to £40k pa.
To find out more about this opportunity:

Date:	16 February 2011
Company:	David Reekie & Sons Ltd (Renfrew)
Details:	CNC Programmer, setter, operator required for subcontract machine shop near Glasgow Airport. Experience of Fanuc control system a must.
To find out more about this opportunity:

Date:	15 February 2011
Company:	Level Developments Ltd
Details:	CNC SETTER/OPERATOR - £16-£20k + Bonus Level Developments is a successful and respected worldwide leading manufacturer of specialist spirit levels, level sensors and inclinometers. A position has arisen for a full time CNC setter and operator to join the company. The successful candidate will be working in our machine shop as a CNC SETTER and OPERATOR. Ideally we are looking for someone with experience in this role who is also able and willing to progress to learn manual and CAD CAM programming. • Setting up machines ready for production from works instructions • Proving out first operations • Loading and operating the machines • Inspection of components to the relevant drawings • Machine maintenance • General workshop duties Full training will be provided on the details of the specific machines and software we use. We currently have a Hardinge VMC with Fanuc control and a Dugard Eagle VMC with Fanuc control which are mostly programmed offline using SprutCam. We also have a Citizen M32 sliding head lathe with proprietary control and offline software. Experience of these particular systems would be useful but not essential. Previous Experience: • Must have experience in CNC machine setting and operating • Engineering background • Ability to read engineering drawings and understand tolerances. • Fully computer literate in MS Word, Excel, Access and Outlook You must: • Be enthusiastic and willing to contribute to the continuous improvement and growth of the company • Have the ability to change priorities to daily requirements. • Understand the urgency of production deadlines and work well under this pressure. • Be happy working in a small company environment where everyone ‘mucks in’. • Have excellent communication and organisational skills. • Be trustworthy and reliable. Package we offer: • Bi-annual staff bonus scheme based on individual and company performance • Training where necessary • Car parking facilities
To find out more about this opportunity:

Date:	14 February 2011
Company:	Protek Engineering
Details:	CNC Lathe Setter /Operator/Programmer, Must have strong Engineering background and experience in Aerospace and have worked to tight tolerances.Fanuc based controls the candidate must be able to work under own supervision. 39 hour week with overtime.
To find out more about this opportunity:

Date:	08 February 2011
Company:	Denholm Rees & O'Donnell LTD (Merseyside)
Details:	Denholm’s is a small to medium sized subcontract engineering company based on Merseyside. We are currently looking for VMC machinists. Applicants must be time served and able to program, set and operate Vertical Machining Centres. Applicants must be familiar with Fanuc, Heidenhain, Mazatrol & control systems and knowledge of Mazak, Bridgeport and Cincinnati VMC’s would be beneficial. The main work carried out is the manufacture of fluid power components such as valve and pump parts. Our table sizes range from 680 to 2000mm and involve the machining of carbon steel through to some of the more exotic stainless steels. Denholm’s offer good rates of pay, company bonus schemes, 5 weeks paid holidays, and many other benefits full details available on application. We operate a single shift system 39 hours per week, Mon - Thurs 7.30 - 16.30 & Fri 7.30 - 12.30. Contact details – Email - Ianj@denholms.co.uk Ian Johns (Works Director) Denholm Rees & O’Donnell Ltd 110 – 116 Albany Road Aintree Merseyside L9 0HB
To find out more about this opportunity:

Date:	08 February 2011
Company:	Denholm Rees & O'Donnell LTD (Merseyside)
Details:	Denholm’s is a small to medium sized subcontract engineering company based on Merseyside. We are looking for CNC turners. Applicants must be time served and able to program, set and operate CNC lathes. Applicants must be familiar with Fanuc control systems and knowledge of Daewoo/ Doosan machines would be beneficial. The main work carried out is the manufacture of fluid power components such as valve and pump parts. Our chuck sizes range from 8" to 30" and involve the machining of carbon steel through to some of the more exotic stainless steels. Denholm’s offer good rates of pay, company bonus schemes, 5 weeks paid holidays, and many other benefits. We operate a single shift system 39 hours per week, Mon - Thurs 7.30 - 16.30 & Fri 7.30 - 12.30. Contact details – Email - Ianj@denholms.co.uk Ian Johns (Works Director) Denholm Rees & O’Donnell Ltd 110 – 116 Albany Road Aintree Merseyside L9 0HB
To find out more about this opportunity:

Date:	04 February 2011
Company:	Colston Engineering Services Ltd
Details:	Colston Engineering Service Ltd manufacture low to medium quantity, small to medium size, high quality general engineering products for a wide range of blue chip customers. We are currently looking to recruit an experienced Machine Shop Supervisor who can program and run manual and CNC turning and milling machines as well as supervise a small team of machine operators. Reporting to the Operations Manager you will have a responsibility for quality, production targets and tooling methodology. Working in close liaison with Project, Operations and Quality Management personnel are key elements of this role. The successful candidate will need to demonstrate they have experience and a proven track record of this type of role in a similar environment. There will be an initial 3 month probationary period after which time a permanent position may be offered based on performance. • Setting and operating CNC Milling & Turning Machines. • Experience of programming Fanuc, XYZ & Mazatrol control systems. • Experienced operation of manual Lathes, Mills & Drills. • Mechanical engineering skills, including measurement and inspection techniques. • Supervising Machine Shop Personnel.
To find out more about this opportunity:

Date:	04 February 2011
Company:	Colston Engineering Services Ltd
Details:	Colston Engineering Service Ltd manufacture low to medium quantity, small to medium size, high quality general engineering products for a wide range of blue chip customers. We are currently looking to recruit an experienced skilled Machinist who can program and run manual and CNC turning and milling machines to join a small team of machine operators. The successful candidate will need to demonstrate they have experience and a proven track record of this type of role in a similar environment. There will be an initial 3 month probationary period after which time a permanent position may be offered based on performance. • Setting and operating CNC Milling & Turning Machines. • Experience of programming Fanuc, XYZ & Mazatrol control systems. • Experienced operation of manual Lathes, Mills & Drills. • Mechanical engineering skills, including measurement and inspection techniques.
To find out more about this opportunity:

Date:	02 February 2011
Company:	M&I Materials Ltd
Details:	CNC Turner Operator/Programmer. Experience of Mazak CNC lathes with live tooling and Mazatrol controls. Setting and operating conventional lathes. Carrying out quality self inspection of all parts using standard inspection equipment and manual CMM/CNC CMM. Hours of work - Monday to Friday working weekly alternate shifts of 6/2 and 2/10. Annualised hours system of working 1711.5 hours per year.
To find out more about this opportunity:

Date:	02 February 2011
Company:	M&I Materials Ltd
Details:	CNC Vertical Milling Centre Setter/Operator required. Experience of Fanuc and Heidenheim controls . Expereince of ISO programming. Running VMC's for small/medium batches. Producing high quality parts in Tungsten heavy alloy materials. Carry out quality self inspection of all own parts using standard inspection equipment and manual CMM/CNC CMM. Hours of work - Monday to Friday working weekly alternate shifts of 6/2 and 2/10. Annualised hours system of working 1711.5 hours per year.
To find out more about this opportunity:

Date:	27 January 2011
Company:	Kane Precision Engineering
Details:	Progressive aerospace components machining company requires experienced CNC programmers in Mastercam and Hypermill, immediate start, excellent rates, new plant.
To find out more about this opportunity:

Date:	27 January 2011
Company:	Aerotech
Details:	CNC Turner Overview of the Role The role will involve working as a team in programming, operating & setting CNC Turning Centres in accordance with customer specifications to machine a wide variety of components to tight tolerances and high quality standards. Requirements for the Role Previous experience of setting and operating CNC Lathes & Turning Centres is essential along with a relevant apprenticeship qualification (or equivalent), experience of Fanuc controls would be advantageous. The right candidate for the role will be able to read, interpret & communicate technical drawings, whilst establishing the correct tools required for each operation.
To find out more about this opportunity:

Date:	27 January 2011
Company:	Aerotech
Details:	CNC Bed Mill Setter Operator Overview of the Role The role will involve working as a team in programming, operating & setting CNC Bed Milling Machines in accordance with customer specifications to machine a wide variety of components to tight tolerances and high quality standards. Requirements for the Role Previous experience of setting & operating a CNC Bed Milling machine is essential along with a relevant apprenticeship qualification (or equivalent), experience of Heidenhain controls would be advantageous. The right candidate for the role will be able to read, interpret & communicate technical drawings, whilst establishing the correct tools required for each operation.
To find out more about this opportunity:

Date:	25 January 2011
Company:	Long & Marshall Limited
Details:	MAZAK ‘CNC Miller’ with preferably ‘Programming’ experience but must have a minimum of ‘Setting & Operating’ experience in 3 & 4 axis machining with ‘Mazatrol’ controls. The basic rate for this position would be between £12.00 to £15.00 per hour based on a 39 hour week + shift premium of up to 25% on basic rate (the basic rate is subject to experience and is based on candidates with Programming, Setting & Operating experience). Notes: Essentials for this position are that all applicants must have a proven track record for the vacant positions detailed and must have a minimum 5 years (recent) experience doing that role in the same ‘CNC Precision Machining & Engineering Environment’ within the same business sectors focused on by L&M. Long & Marshall Limited a Precision Engineering manufacturer of highly accurate, close tolerance, complex parts for the Aerospace, Defence & Commercial Sectors have an exciting position to offer in a demanding Quality BS EN 9100:2003, ISO 9001:2008 environment.
To find out more about this opportunity:

Date:	25 January 2011
Company:	Long & Marshall Limited
Details:	MIKRON / DMG ‘CNC 5-Axis Miller’ with preferably ‘Programming experience but must have a minimum of Setting & Operating experience preferably with ‘Heidenhan’ experience but possibly with the view to learning other controls i.e. ‘Mazatrol’. The basic rate for this position would be between £12.00 to £15.00 per hour based on a 39 hour week + shift premium of up to 25% on basic rate (the basic rate is subject to experience and is based on candidates with Programming, Setting & Operating experience). Notes: Essentials for this position are that all applicants must have a proven track record for the vacant positions detailed and must have a minimum 5 years (recent) experience doing that role in the same ‘CNC Precision Machining & Engineering Environment’ within the same business sectors focused on by L&M. Long & Marshall Limited a Precision Engineering manufacturer of highly accurate, close tolerance, complex parts for the Aerospace, Defence & Commercial Sectors have an exciting position to offer in a demanding Quality BS EN 9100:2003, ISO 9001:2008 environment.
To find out more about this opportunity:

Date:	25 January 2011
Company:	mold systems
Details:	Experienced EDM operator required preferabley with mold tool experience.Agie machine experience preffered but not essential.Good rates of pay + overtime + shift allowance job position permanent.
To find out more about this opportunity:

Date:	24 January 2011
Company:	Browse Bion
Details:	CNC 3 axis milling (C-TECH) and 3 axis routing (Pacer), setting and operating. Aluminium and plastics for signs Full time with overtime usually available £11 to 14 per hour see www.browsebion.com
To find out more about this opportunity:

Date:	24 January 2011
Company:	Randstad Inhouse Services
Details:	Salary: £9.71 - £9.71 per hour Contract type: Temporary job description Our client, Perkins Engines, based in Stafford are seeking CNC Machinists. To begin with all positions are on a temporary on-going contract. All applicants must be flexible to work any shift. Job Responsibilities: Responsible for ensuring all products are made and maintained to specification and comply with company quality standards Completes assigned quality checks Identifies problems and informs the Team Lead Participate in basic process troubleshooting Work in a safe and efficient manner to achieve productivity targets in line with CPS metrics Preferred Skills: Previous CNC Machining experience is essential Good understanding of manufacturing processes Personal Attributes: Good communication skills Initiative Can-do attitude Ability to work under pressure Customer focused Associated Benefits: On site canteen Free car parking Dedicated on site agency team Safety orientated environment All workers are entitled to shift allowance To apply please email your CV and Covering letter.
To find out more about this opportunity:

Date:	18 January 2011
Company:	Evenort LTD
Details:	Regular nightshift CNC Setter operator £10 per hour
To find out more about this opportunity:

Date:	17 January 2011
Company:	OTG Precision Engineering Ltd
Details:	Vacancies exist in OTG PE Ltd for skilled in CNC Milling, Grinding and Wire Erosion. Ideally, applicants will possess all of these skills and it would be an advantage if they were originally an Engineer / Toolmaker who has successfully served a recognized apprenticeship. The company is a highly specialized precision engineering company working to ISO 9001 quality controls in a well organized and friendly working environment. The ideal candidates will be conversant with all machining practices and able to work in a team environment. In particular all applicants must have experience in Conventional and CNC Milling, Form Grinding with Optidress and Wire Erosion experience. The production is prototype and small to medium size batch work, and knowledge of Lean and Six Sigma would be advantageous.
To find out more about this opportunity:

Date:	17 January 2011
Company:	Powergrade Ltd
Details:	We are seeking to recruit a Skilled Programmer / Setter / Operator for CNC Machining Centres. Programming knowlegde on Hurco, Fanuc,Heidenhain. Day shift - with overtime available. Immediate start with good rates of pay for the right candidate. Please send your cv to richard@powergrade.co.uk Contact Tel No. o2476 717683
To find out more about this opportunity:

Date:	14 January 2011
Company:	Bindon Engineering Co Ltd
Details:	Looking for a permanent night-shift person with some engineering environment to work as a CNC Turner on lathes, training can be given to the right candidate. Shift pattern 5pm - 3am Monday to Thursday = 40hrs basic per week, with overtime available. Clean working environment, good rates of pay with added shift bonus, working for a family business.
To find out more about this opportunity:

Date:	13 January 2011
Company:	Lloyd Engineering
Details:	Lloyd Engineering requires: • SKILLED FABRICATOR • ENGINEER For the manufacture of screening buckets and agricultural engineering. We are based between Kington and Presteigne – see websites for further information. www.lloydengineering.co.uk / www.screeningbucket.co.uk Part time considered. Competitive rates of pay - levels dependent upon experience. For more information or to apply, please contact Matt Lloyd using the details above.
To find out more about this opportunity:

Date:	13 January 2011
Company:	Newton Equipment Ltd
Details:	We have a small prototype shop equipped with a Brother high speed CnC mill and a Hitachi CNC lathe. We wish to recruit a programmer/operator to run the shop. We plan to install a CAM system once the person has started. We have a flextime working plus all the normal benefits of working for an old established, internationally known company. The vacancy is due to the retirement of the present job holder. The location is Barking, Essex, IG11 8DY 0208 594 7990
To find out more about this opportunity:

Date:	11 January 2011
Company:	Hi-Spec CNC
Details:	We are looking to recruit an additional experienced machine shop estimator. Must be fully conversant with all aspects of CNC machining and dealing with material and sub contract service providers to produce detailed quotations for our customers. Following delivery of the quotation, applicants must be comfortable following up with customers either by phone or e-mail. Hours are open to negotiation - could be full/part time depending upon candidate. Send your CV to Paul Aplin using either paul.aplin@wecl.co.uk or fax to 01254 700233
To find out more about this opportunity:

Date:	11 January 2011
Company:	Hi-Spec CNC
Details:	We are looking to recruit proficient Programmer/Setter/Operators for both milling and turning positions. Applicants should be experienced in either multi-axis turning or 3 axis milling using Mazak or Heidenhein Controls. Working in a busy and expanding sub contract machine shop, you will need to be flexible and used to working to tight timelines. Immediate start - good rates of pay for the right candidiates with both overtime and shift work availble. Send CV to Paul Aplin using either paul.aplin@wecl.co.uk or fax to 01254 700233
To find out more about this opportunity:

Date:	11 January 2011
Company:	Delta Tooling ( Horsham ) Ltd
Details:	We are seeking to recruit CNC setter operator(s) with extensive experience to join our manufacturing team. Candidates must be proficient in the use of 3 Axis CNC machining centres with Heidenhain controls. The ability to work within a small , efficient and flexible team on short lead time precision component manufacturing projects is necessary. An ability to contribute to the continuous improvement of quality in this high-tech environment is essential. Hours 8am to 430pm - Monday to Friday, Double day shift may b e required in the future, as the company is growing. Please email your CV to luke@deltatooling.co.uk or telephone 01 403 780 468 to and ask for Lukr Tetlow.
To find out more about this opportunity:

Date:	11 January 2011
Company:	Thermoplastic Engineering Ltd
Details:	CNC Programmer/Setter/Operator for mainly turning work and some milling work. Applicant must be familiar with Fanuc and Heidenhain controllers. Ideally applicant will have experience of machining rigid plastics. Full time permanent position. 37.5 hours per week monday to Friday. Hours flexible to suit employee and employer. Salary £10.00 + per hour negotiable depending on experience.
To find out more about this opportunity:

Date:	10 January 2011
Company:	TR PRECISION LTD
Details:	CNC SETTER PROGRAMER OPERATOR MUST BE ABLE TO USE MAZAK CONTROL AND FANUC MUST HAVE MIN OF5 YEARS EXPERIENCE ON LATHES GOOD RATE OF PAY TO RIGHT CANDIDATE
To find out more about this opportunity:

Date:	10 January 2011
Company:	SURGICAL INNOVATIONS
Details:	CNC Setter/Programmer required by expanding medical company in Horsforth area of Leeds.Working on CNC lathes (inc sliding head) and CNC milling machines. Apprentice trained if possible. Candidate would have solid CNC background working on Fanuc controls. Experience of Haas controls would also be an advantage. Hours of work are 37.5 hrs per week on a rotating 3 shift pattern. Clean working enviroment with good rates of pay to right candidate. The position is permanent. The Company operates an attractive pension and a death in service scheme. Please send CV`s to Gary Hawkins Machine Shop Manager Surgical Innovations limited Clayton wood house 6 Clayton Wood Bank Leeds LS16 6QZ E-MAIL : gary.hawkins@surginno.co.uk
To find out more about this opportunity:

Date:	07 January 2011
Company:	Gibbs Gears Precision Engineers Ltd
Details:	CNC Programmer / Setter / Operator required for a specialist manufacturing company based in Stoke Mandeville, Buckhamshire HP22 5BL. Duties for this role will include programming CNC Milling machinery using Heidenhein, Fanuc and Siemens Sinumerik Controls. Setting and Operating Multi Axis Milling machines. Must be able to work too tight tolerances in a range of materials. Excellent working conditions Starting Rate £10.71 per hour. 39 hour week + Overtime.
To find out more about this opportunity:

Date:	07 January 2011
Company:	Olney Precision Ltd
Details:	Established family owned precision engineering company with wide range of loyal customers require a managing director to take full control upon retirement of present incumbent If you are used to dealing with all aspects of running a small busy company please submit your CV by email
To find out more about this opportunity:

Date:	07 January 2011
Company:	Delphi Diesel Systems
Details:	To be responsible for providing technical engineering support and expertise for new product/process introduction programmes and implementing strategies for improving manufacturing process capability. Responsibilities: •To provide expert knowledge of high volume diesel fuel injection equipment manufacturing processes including close tolerance machining, assembly and test systems. •To improve manufacturing performance with regard to process capability, output, productivity and cost. •To deliver robust manufacturing solutions for new product/components in line with the 5P process to meet the required HS&E aspects, first time quality, installed capacity and cost. •To provide expertise in supporting the business with regard to the Delphi Manufacturing System (DMS), policies and procedures. •To support the business by providing expertise and driving quality systems including the management of statistical methods, problem solving techniques and continuous improvement, taking a lead role in group activities. •To deliver manufacturing process documentation and training in line with business training standards (5 Star process) •To maintain a clean and tidy operating environment at all times through an active and practical approach to all HS&E issues •To improve the efficiency of the Manufacturing Engineering processes through participation in continuous improvement projects Skills & Qualifications: •Experience in one or more of the following fields:- - High volume precision grinding and super finishing operations - Automated assembly - High volume hydraulic performance testing and control ystems - Best practice solutions for cell design and material flow management - Actively contribute to the running and success of multi- disciplinary project teams. •Qualified to degree level or equivalent in an engineering discipline with an interest in manufacturing •Excellent presentation, communication and interpersonal skills. •Previous knowledge and experience of Fuel Injection Equipment is desirable, but not essential
To find out more about this opportunity:

Date:	06 January 2011
Company:	TR PRECISION LTD
Details:	CNC PROGRAMMER SETTTER OPERATOR MUST BE FULLY EXPERIENCE WITH MAZAK MACHINES SUM EXPERIENCE ON FANUC WOULD BE GOOD RATE IS NEGOTIABLE
To find out more about this opportunity:

Date:	06 January 2011
Company:	Micron Workholding Ltd
Details:	Micron Workholding Ltd are the manufacturers of the Flexible MicroLoc Workholding System. Due to expansion into emerging markets we require a new engineer. We also provide high tech precision subcontracting services for ed motorsport companies. We are looking for an experienced CNC Programmer/setter/Operator on milling and turning, who is capable of working alone with a flexible outlook of duties. Some knowledge of surface grinding would be useful. standard week is 40 hours with some overtime. A good salary package is offered depending on experience and ability.
To find out more about this opportunity:

Date:	05 January 2011
Company:	Shearline Precision Engineering Limited
Details:	Nightshift CNC Miller who is able to programme/set/run Fanuc based control systems. You should have served an engineering apprenticeship or gained a high level of experience in machining. This role would ideally suit someone who has 4th and 5th Axis machining experience and it would be of benefit to have machined a wide range of materials. The person should be able to work to tight machining tolerances and be responsible for quality of own work. We are looking for you to start immediately. As stated this position is for our night shift as follows: a 37.5 hour week of 3 days Monday to Wednesday inclusive 6.00 pm to 6.30 am with 30 mins meal break and two 15 minute tea breaks. Please submit your application with details of your pay expectations to hilary.bacon@shearline.co.uk
To find out more about this opportunity:

Date:	05 January 2011
Company:	Optimum Precision Engineering Ltd
Details:	CNC Millers required for Ely's premier sub-contract engineering company specialising in precision-machined components. Fully-skilled, full-time CNC millers with HAAS machine experience for new and existing contracts. Must be used to working to high standards. Use of Edgecam software would be an advantage. Excellent rates of pay and overtime available. For further details please contact Brian Runham on (01353) 66114 or to apply please forward a copy of your CV by email.
To find out more about this opportunity:

Date:	05 January 2011
Company:	Colbree
Details:	CNC PROGRAMMER/SETTER MILLERS & TURNERS SECTOR –SUB-CONTRACT ENGINEERING BASED – PITSTONE (Near Tring) SALARY – Excellent rates negotiable dependent on experience • THE OPPORTUNITIES - We are a medium sized engineering company based On the 3 counties border of Hertfordshire , Bedfordshire & Buckinghamshire, specialising in the manufacture of precision components to various Industries, We are now recruiting. Due to extensive amounts of work and planned investment in new plant machinery, we now have opportunities for a skilled CNC Programmer / Setters to join the company. • ABOUT YOU - TURNERS : • Ideally you will have a minimum 18 months experience in Programming,setting and operating CNC Sliding Head and or Turn Mill Lathes, previous use of Citizen Control and or FANUC controls or “OneCNC” cad cam would be an advantage. MILLERS : • Ideally you will have a minimum 18 months experience in Programming and operating vertical and or horizontal machining centres , previous use of FANUC controls or “OneCNC” cad cam would be an advantage. • Your duties will include programming, setting and operating as required on the double day shift performing tool changes and program edits as required. • You will have a sound understanding of engineering drawings and be conversant with relevant inspection equipment as you will be responsible for the quality of the work you produce. Machines : Citizen M32 , L20 Nakamura WT150 Hardinge/Bridgeport VMC XP1000 Kitamura MyCenter H400 HAAS VF2SS , Super Mini Mill 2 Hyundia SPT30 • INTERESTED? - To apply for either of the vacancies please call Robert Clark on 01296 644285, alternatively feel free to email your CV with a covering letter to Robert.clark@colbree.com
To find out more about this opportunity:

Date:	05 January 2011
Company:	Symmetry Medical Ireland
Details:	Medical device manufacturer in Cork area requires experienced CNC machinists / operators to facilitate expansion. Medical device industry experience preferred but not essential as training will be provided. Other duties will include: component cleaning, manual/CMM inspection and laser marking. Some shift work will be required depending on production line placement. Salary dependant on experience.
To find out more about this opportunity:

Date:	05 January 2011
Company:	TG Engineering Ltd
Details:	Fully Skilled Programmer/Setter/Operator Mazak Mill/Turn CNC Lathe required by a busy Precision Engineering company in Ferndown, Dorset. Excellent conditions, 39 hr basic week, overtime available, 25 days holiday per annum plus bank holidays .
To find out more about this opportunity:

Date:	05 January 2011
Company:	PETER COPSEY ENGINEERING LTD
Details:	Wanted with immediate effect. Time served, experienced Miller to be taken on Temp to Perm in the Witham area of Essex (Days). Candidate must be able to operate Mazak machines and be able to programme using Fanuk controls. Salary negotiable on experience. 40 hour week with overtime at flat rate. Candidate must be a team player with a ‘can do’ attitude as the type of work involves small batch complex machining.
To find out more about this opportunity:

Date:	05 January 2011
Company:	ZOT Engineering Ltd
Details:	ZOT Engineering Ltd - Musselburgh, Tel No: 0131 653 6834 www.zot.co.uk Skilled/ Semi Skilled - CNC Milling/ Machinist required. Duties will include setting, operating and programming CNC milling machines. Required Skills: Candidates must have experience of conventional milling and turning machines and be familiar with programming CNC machines, preferably from a manufacturing back ground working with small to medium sized machined parts. Must be able to read drawings and measure using micrometers and vernier calipers. Applicants will be required to a rotational shift pattern including day, back and night shifts Mon to Fri. Hours 37.5 week. Rate: £8.50 to £9.47 depending on experience How to apply:: Phone tel. no: 0131 653 6834 and ask for application form or alternatively email MikeSullivan@zot.co.uk
To find out more about this opportunity:

Date:	05 January 2011
Company:	Rotolok Limited
Details:	Require 2 x CNC Operatives must be skilled to work on Horizontal Machining Centre with Toshnic Control and Dai Li Horizontal Machining Centre with Fanuc Control and CNC Lathe with Fanuc Control. Housr 8 am - 4.30 pm Mon-Thursday and 8 am - 3.30 pm Fridays only 1/2 hour lunch break each day 20 days paid Annual Leave plus Bank Holidays Dependant on experience pay in the region of £8 per hour
To find out more about this opportunity:

Date:	05 January 2011
Company:	Hillcrest Machinery & Engineering Ltd
Details:	Fully skilled CNC Millers & Turners required for work in Precision Engineering company in Fareham, Hampshire. Experience essential using either Fanuc lathes or Heidenhein mills and a good all-round engineering background is required. 40 hours per week (days) plus overtime. Good rates of pay offered. Please contact for further information on 01329 231245 or visit our website at www.hillcresteng.co.uk to upload your C.V.
To find out more about this opportunity:

Date:	05 January 2011
Company:	Ilmor Engineering Ltd
Details:	Ilmor Engineering Ltd is a successful designer and manufacturer of engines for use in the Indy Racing League and Nascar Series, as well as several new and exciting projects currently under development. As a result we now seek to recruit a new member to our Manufacturing Team. Manufacturing / Production Engineer / CNC programmer Ilmor Engineering Limited is currently seeking a Manufacturing Engineer who will be involved in all aspects of engine component manufacture this position requires a creative approach with the capability of turning ideas into viable production solutions. Duties will include producing drawings for production and prototype engine component jigs and fixtures, ing tools and machine strategies, producing and verifying N/C code mainly from 3D models and following these through to simulation and quality analysis. The suitable applicant must have the ability to work under their own initiative to tight deadlines. Previous experience of using Catia V5 and Open Mind HyperMILL is essential. From time to time the role may require some shift pattern working and potential applicants need to have an adaptable and flexible approach to their work. The suitable applicant will receive a competitive salary as well as other benefits including a non-contributory pension scheme and private medical insurance. To apply for the above position, please send a brief career summary outlining your experience and suitability for this position to : hr@ilmor.co.uk or by mail to : Ilmor Engineering Ltd. Quarry Road, Brixworth, Northamptonshire. NN6 9UB and mark your application for the attention of the HR Manager.
To find out more about this opportunity:

Date:	04 January 2011
Company:	Prima Tooling
Details:	CNC/Manual - Turning / Milling - Setter/Operator Main Responsibilities: Set and operate CNC or Manual Lathes as efficiently as possible Set and operate CNC or Manual Milling machines as efficiently as possible Report any machine defects or breakdowns to line supervisor Use Oxy-Acetylene Brazing equipment Work to Company instructions and drawings Key Tasks: Set CNC machine to operate at maximum output Carry out basic maintenance of machine, i.e. cleaning, filling with oil/coolant. Deburring of components Be able to inspect own work is within drawing tolerances Maintain a clean and safe working environment Ensure compliance with health and safety Skills and Attributes Required: Able to set and operate CNC or Manual Milling machines Able to set and operate CNC or Manual lathes Able to read drawings and relevant information Able to use Oxy-Acetylene Brazing equipment Flexible attitude (may be shifts in future) Good housekeeping and health and safety procedures Able to identify tooling and working methods Good knowledge of machine shop practices in milling, drilling, boring and grinding Knowledge of CNC codes to effectively operate machine Experience preferred but training will be given Knowledge of cutting tool manufacture would be an advantage but not essential Please send your C.V. for the attention of Mark Cattle, to Prima Tooling, 4 & 6 Tallon Road, Hutton Industrial Estate, Brentwood, Essex, CM13 1TJ Or email to mark@primatooling.co.uk Job Type: Permanent Location: Brentwood Salary: £9-£11 per hour, depending on experience Start Date: Immediate Hours: Basic 40 per week. Monday – Friday 23 Days Holiday + Statutory holidays CNC/Manual - Turning / Milling - Setter/Operator Main Responsibilities: Set and operate CNC or Manual Lathes as efficiently as possible Set and operate CNC or Manual Milling machines as efficiently as possible Report any machine defects or breakdowns to line supervisor Use Oxy-Acetylene Brazing equipment Work to Company instructions and drawings Key Tasks: Set CNC machine to operate at maximum output Carry out basic maintenance of machine, i.e. cleaning, filling with oil/coolant. Deburring of components Be able to inspect own work is within drawing tolerances Maintain a clean and safe working environment Ensure compliance with health and safety Skills and Attributes Required: Able to set and operate CNC or Manual Milling machines Able to set and operate CNC or Manual lathes Able to read drawings and relevant information Able to use Oxy-Acetylene Brazing equipment Flexible attitude (may be shifts in future) Good housekeeping and health and safety procedures Able to identify tooling and working methods Good knowledge of machine shop practices in milling, drilling, boring and grinding Knowledge of CNC codes to effectively operate machine Experience preferred but training will be given Knowledge of cutting tool manufacture would be an advantage but not essential Please send your C.V. for the attention of Mark Cattle, to Prima Tooling, 4 & 6 Tallon Road, Hutton Industrial Estate, Brentwood, Essex, CM13 1TJ Or email to mark@primatooling.co.uk Job Type: Permanent Location: Brentwood Salary: £9-£11 per hour, depending on experience Start Date: Immediate Hours: Basic 40 per week. Monday – Friday 23 Days Holiday + Statutory holidays
To find out more about this opportunity:

Date:	04 January 2011
Company:	Anotronic Limited.
Details:	Anotronic is a very busy sub-contract engineering company specialising in 4&5 axis CNC milling,Turning and EDM (wire and spark),ECM and ECD. Due do good order book and extensive investment in extra machines we require. (1)Time served CNC Programmer, Setter, Operator experienced on Hurco machining Centres. Excellent rates of pay and usual benefits. (2)Time served CNC Programmer, Setter, Operator experienced on DMG lathes with siemens control. Excellent rates of pay and usual benefits. (3)EDM operator . Excellent rates of pay and usual benefits.
To find out more about this opportunity:

Date:	04 January 2011
Company:	APH3G Ltd
Details:	We are looking for a CNC Machinist with toolmaking experience, to run vmc machines with Heidenhain controls. Heidenhain experience prefered but not essential. This is a permanent position, 40 hours per week plus overtime.
To find out more about this opportunity:

Date:	04 January 2011
Company:	D&H Engineering Ltd.
Details:	39 hr week plus over time in a busy machine shop with vmc mills and a cnc lathe , im looking for a programmer/setter /operator to work cnc Bridgeport milling machines using Haidenhein operating systems . its a busy sub contract company who have long term contracts. We operate a single day shift and overtime is the norm. Salary is negotiable. please email me at the address below, rates details on skill requirement, package, hours etc..
To find out more about this opportunity:

Date:	04 January 2011
Company:	Alliance Design & Mfg Ltd
Details:	Due To our Second Toolroom Facilities expansion we require a Toolroom Manager - Must be Highly Motivated individual - Committed to our High Quality Precision manufacturing team. Excellent career prospects - salary & Benefit linked to performance & Ability. Injection & Blow Mould toolmakers With our Own Plastic injection moulding facility.
To find out more about this opportunity:

Date:	04 January 2011
Company:	Excelda Precision
Details:	CNC Miller / setter / programmer. Experience of Hurco.
To find out more about this opportunity:

Date:	04 January 2011
Company:	Newburgh Engineering
Details:	Skilled Horizontal Borer programmer/operators required to work days and nights. Required due to winning new long term contract. Preferably conversant with Heidenhain and Siemens controls but training will be given.
To find out more about this opportunity:

Date:	04 January 2011
Company:	DJJ Precision engineering Ltd
Details:	Time served CNC Programmer, Setter, Operator experienced on Mazak machining Centres or lathes and familiar with Fanuc controls. Excellent rates of pay and usual benefits. Apply DJJ Precision Engineering Ltd 01495 760561 emailsales@djjengineering.com
To find out more about this opportunity:

Date:	04 January 2011
Company:	KM Engineering Ltd
Details:	CNC Millers Required to set and operate CNC Maching Centres with Fanuc Control. We are a thriving company specialising in work for the Oil & Gas Industry. 23 days holiday rising to 28 + bank holidays. Company pension, sick pay + bonus scheme. Salary up to £33,000 Send CV by e-mail to shaun@km-engineering.co.uk
To find out more about this opportunity:

Date:	04 January 2011
Company:	A K Precision Ltd
Details:	Production manager required. Experiance of developing and managing production schedules in a busy sub-contract CNC machine shop essential. 25 days holiday plus banks. Salary negotiable. Great opportunity to develop a career in a fast growing company.
To find out more about this opportunity:

Date:	30 December 2010
Company:	Armstrong Medical
Details:	Injection Mould Maker, Coleraine, Co Londonderry, Up to £35,000 DOE Plus Company Attendance Bonus, Company Stakeholder Pension (after 13 weeks), Contributory Health Insurance Plan, 20 Days’ Holiday + 10 Stats, Your duties will include: - Developing mould design solutions - Manufacturing jigs and fixtures - Designing and manufacturing moulds - Modifying and maintaining moulds - Recommending changes in mould design Find out more contact me using the red button below
To find out more about this opportunity:

Date:	23 December 2010
Company:	Anderson Engineering
Details:	40 hr week plus over time in a busy machine shop with 4 vmc mills and a cnc lathe , im looking for a programmer/setter /operator to work bridgeport mills. its a busy sub contract company who have long term contracts. please email me at the address above rates £10.30/hr
To find out more about this opportunity:

Date:	23 December 2010
Company:	Linecross Ltd
Details:	Job Description: Overview A permanent opportunity for a CNC Programmer/Setter to join a successful manufacturing company. Company Based in Rutland this growing company are market innovators in their field. Job Role: The role will involve programming 5-axis Siemens & BWO controlled machines – often from scratch. Other duties will include operating and setting the machines and any other general associated tasks. The role is an alternating 8-hr shift working Monday to Friday (0600 – 1400) and a 10hr shift working Monday - Thursday (1400 – 2400). Overtime paid at premium rates. Experience Required Ideally should be time-served. The ideal candidate will specialise in CNC Programming and Setting. Experienced working with plastic would be a distinct advantage. Remuneration Negotiable 23 days holiday plus 8 bank holidays
To find out more about this opportunity:

Date:	23 December 2010
Company:	Tinius Olsen Ltd
Details:	Manual Miller , preferably with turning experience, required for small batch work. 6 month contract. 39 Hour week. Overtime available.
To find out more about this opportunity:

Date:	23 December 2010
Company:	Ryetools Limited
Details:	Iclude details on skill requirement, package, hours etc... TOOLMAKERS NEEDED. Ryetools based in N.Yorks have vacancies for mould toolmakers. Experience of high quality mould assembly needed including grinding. Days only with flexable hours. Clean modern workshop. Very stable company offering possible re-location assistance to live in a very desirable area of UK. Regular, but optional overtime allways available, boosting earnings to £40k pa.
To find out more about this opportunity:

Date:	23 December 2010
Company:	Northey Technologies Ltd
Details:	A compressor manufacturer in Poole, Dorset has a vacancy for a Machinist, preferably XYZ Pro Track control trained but on job training can be given. To be machining small batch, tight tolerance castings using a 3 axis control milling machine and a Union boring machine, some basic turning to be carried out as well. Duties to include: • All machining of in house parts • All inspection of parts for as well as sub contract machining • Some machined fitting duties. Hourly rate tbc, d.o.e. Please send CV to kirsty.bell@northey.net or to Northey Technologies Ltd, Nortech House, Dawkins Road Industrial Estate, Poole, BH15 4JY. Telephone 08452 600 668
To find out more about this opportunity:

Date:	22 December 2010
Company:	Burdon Ltd
Details:	CNC Millers / Turners / Vertical Borers Due to further expansion at our state of the art Teesside facility we are looking for experienced CNC Operators. We require time served machinists who are capable of setting and operating the very latest CNC machine tools from Mazak, DMG & Puma and are familiar with Fanuc, Mazatrol , Heidenhein or Siemens controls. We are looking for people who can work to close tolerances in a precision machine shop. We offer excellent remuneration, development opportunities and job satisfaction to the right people. To apply, email your CV to ruth@burdon-ltd.co.uk or post to Ruth Graham at the address below. Burdon Ltd, 3 Ellerbeck Way, Stokesley Industrial Park, Stokesley, Middlesbrough, TS9 5JZ
To find out more about this opportunity:

Date:	22 December 2010
Company:	Oxford Precision Components
Details:	Experienced CNC Millers, for sub contract company. Knowledge of Haas and Hurco m/c's an advantage. 39 hr. week with plenty of overtime at present
To find out more about this opportunity:

Date:	22 December 2010
Company:	COGSDILL NUNEATON LTD
Details:	CNC PROGRAMMER AND/OR OPERATOR REQUIRED FOR MAZAK INTEGREX MULTI TASKING MACHINES AND/OR FADAL VMC MACHINES. 40 HOURS PER WEEK WITH GOOD PACKAGE AND NEGOTIABLE SALARY DEPENDING ON EXPERIENCE.
To find out more about this opportunity:

Date:	22 December 2010
Company:	Thompson - J H May
Details:	CAD/CAM Engineer/CNC Machinist/Miller/Toolmaker Superb opportunity for a highly experienced and proactive CNC engineer to join our high tech manufacturing team. The work is varied and interesting encompassing high precision low volume component manufacture,toolmaking, pattern making, model making and 3D CNC sculpture. Practical experience of CNC milling is essential. We operate Haas 3 and 4 axis CNC machining centres including a series of brand new machines being installed in January 2011. Programming and machining strategy is via Delcam Powershape and Powermill. Whilst an in-depth knowledge of Delcam would be an advantage we will also consider relevent knowledge with similar programming systems. We operate a single day shift and overtime is the norm. We are based in Essex near to the M25/M11 Salary is negotiable. Tel: 01277 365500 Mail: simon@thompsonprecision.co.uk
To find out more about this opportunity:

Date:	21 December 2010
Company:	DP TECHNOLOGY
Details:	DP Technology is a leading developer of CAM software. Our worldwide headquarter is in California and product development teams in California, Florence and Berlin. ESPRIT Software drives machine tools in over 15,000 shops across the globe, and is available in more than 15 languages, including Russian, from over 200 resellers. ESPRIT’s full-spectrum functionality includes programming for 2–5 axis milling, 2–22 axis turning, 2–5 axis wire EDM, multitasking mill-turn machining, and B-axis machine tools. ESPRIT developed its activity through an Indirect Sales Channel : more than 200 companies around the world represent our knowledge and values in the industry market of their country. To improve our strong growth, we look for a partner in UK able to represent our core values: Passion | Vision | Commitment | Power | Performance | Value. The objective is to have an autonomous entity, able to realize the pre-sales, the sales, the implementation of the project and the follow-up of customers. You improve the development and the sales follow-up in UK both by your local action, by building good action plan and customer database, by the accompaniment of your teams, and by your contribution to the negotiation of contracts and local referencing. Ensure the continuity of the links with your customers, you are the permanent contact between DP Technology and customers. DP Technology offers 50 % of the turnover realized on CAM software ESPRIT but preferential conditions can be discussed when you start your activity. We can start with a 1 man structure company, and grow up together… If you are interested in this opportunity, please send me CV and cover letter. David Meynaud Indirect Sales Manager David.meynaud@dptechnology.com +33 6 84 81 70 91
To find out more about this opportunity:

Date:	21 December 2010
Company:	Claro Precision Eng ltd
Details:	CNC Miller/Setter/Programmer. Must be fully skilled with experience of Heidenhain or Fanuc control. Small batch sub contract work requiring top quality precision and finish. Modern clean factory with a good atmosphere and 2 shift operation. Competitive pay and good conditions to work in.
To find out more about this opportunity:

Date:	21 December 2010
Company:	Kelston Precision Gears Ltd
Details:	CNC Programmer / CNC Setter – Fanuc, Heidenhain, Mazatrol Bristol Established for 35 years we are one of the largest privately owned gear manufacturing companies in the UK. An opportunity has now arisen for a CNC Programmer / CNC Setter to join our team. As a CNC Programmer / CNC Setter, you will work on various CNC mills and lathes with Fanuc, Heidenhain and Mazatrol controls. For the right person, this role offers scope for progression into a management role. To be considered for this position, you must have: - experience in a similar role working on various CNC mills and lathes - experience working with Fanuc, Heidenhain and Mazatrol controls - broad mechanical engineering experience Additionally, as a CNC Programmer / CNC Setter, you must be self-motivated, and able to problem solve and work alone. Experience in CAD/CAM would be beneficial to your application.
To find out more about this opportunity:

Date:	21 December 2010
Company:	Itasco Precision Ltd
Details:	CNC Turners required for a very busy sub-contract environment servicing mainly the oil and gas sector. Applicants must be time served and have a sound knowledge of Fanuc based systems. Experience with Inconel weld cladded components would be beneficial. A shift system is operational. An excellent package is available for the right applicants including a good salary, pension, death in service and bonus scheme.
To find out more about this opportunity:

Date:	21 December 2010
Company:	Quarry Manufacturing & Supplies Ltd
Details:	CNC Programmer/Setter/Operator required for our Puma 700LM 3.2m Bed, 900 Swing, Fanuc 21i-TB Control with Live Tooling. Applicants must be able to demonstrate previous experience in Fanuc Programming within a precision/heavy engineering environment. Have a sound understanding of manufacturing processes particularly turning and milling is required as is an understanding of tooling, jigs, fixtures and their application in the manufacturing process. You must be able to read drawings and understand technical specifications with the ability to interpret into manufacturing information and carry out self verification of technical compliance with appropriate measuring equipment and techniques. In return an excellent package is on offer including a good salary, benefits including paid overtime, 25 days holiday + statutory holidays and pension. The working week will be Monday to Friday minimum 40 hours.
To find out more about this opportunity:

Date:	21 December 2010
Company:	John Hyde Engineering Ltd
Details:	CNC Setter Operator for Mazak Integrex (5 axis) and Mazak FH8800 machines on production work. Experience of castings and forgings and advantage. Must work our two shift system 5 days per week, which offers good overtime. Company expected to grow strongly in 2011.
To find out more about this opportunity:

Date:	21 December 2010
Company:	Mold Systems
Details:	CNC Machinist, preferably with mold tool experience .also efficient with manual mills ,lathes and surface grinding. Shift working and flexibility is essential good rates of pay including shift allowance and overtime
To find out more about this opportunity:

Date:	21 December 2010
Company:	non disclosed apply for full details
Details:	TECHNICAL SALES ENGINEER This is an excellent opportunity for an experienced Technical Sales Engineer to join a well established Dorset based company in the precision engineering industry. You will play an integral role in the company´s continued growth through identifying and developing sales opportunities, managing existing customer relationships and also working with the management team to look strategically at developing plans for long-term growth. Your role will be broad, incorporating - New business development - Growth of existing customer accounts - Responding to incoming business requests - Preparing/ presenting detailed technical proposals - Reporting for management on sales activity. South West (Dorset) The basic salary will be c. £25kwith OTE £40k + car allowance
To find out more about this opportunity:

Date:	21 December 2010
Company:	Peerless Gas Controls
Details:	We are looking for a CNC operator / programmer to start in January 2011. We really want a part timer 3 days a week but we are flexible with the hours, they would need to be located in North Wales as the position is in our Flint factory.
To find out more about this opportunity:

Date:	20 December 2010
Company:	Tufnol Composites Ltd
Details:	CNC programmer/setter/operator milling/routers, mainly fanuc systems. Applicants must be self starters capable of offering all the above, with the ability to interpret customer requirements. Basic hours are 39 hours per week with overtime currently available. Salary would be dependent on experience and we also operate a bonus scheme.
To find out more about this opportunity:

Date:	20 December 2010
Company:	Ryetools Limited
Details:	CNC machinists required for interesting and varied toolroom work making mould parts. We need people that can read drawings, programme and operate either cnc lathes or cnc mills. Good clean modern workshop. Stable company. Standard 39 hour week, 25 days holiday, day shift only, with regular overtime. Earnings up to £40pa with overtime. APPLY NOW.
To find out more about this opportunity:

Date:	20 December 2010
Company:	Safelok Components Ltd
Details:	A world renowned manufacturer of Stainless Steel Valves, Pipe and Instrumentation Fittings is looking to recruit an experienced CNC LATHE MACHINE SETTER. All Candidates must be Time Served and be experienced in the Setting of Single and Twin Spindle Fanuc Controlled 2 & 5 Axis CNC Lathes and ideally have worked in a Medium to High Volume Production Environment. Main duties would include setting, operating, 1st article inspection and ensuring production targets / delivery dates are achieved, applicants will be required to work a day shift of 7.0am to 3.30pm Mon to Fri. The ideal candidate will be rewarded with an excellent Salary, Company Bonus Scheme and paid overtime is readily available.
To find out more about this opportunity:

Date:	20 December 2010
Company:	Hymec Precision Engineering
Details:	CNC Setter/Operator Required to work with Horizontal/Vertical milling centres. Fanuc control producing Aerospace parts from Aluminium/Steel This is a high pressure enviroment producing quality parts Shift available 6pm-6am Mon-Thu with o/t available.
To find out more about this opportunity:

Date:	20 December 2010
Company:	Kinetic Plc
Details:	CNC Programmer required to work within the aerospace sector, The programming experience required is on siemens and fanuc controls. 39 hour basic week betweem 7.55- 4.05 pm monday to friday + overtime. This is a permanent position so if of interest please email me yoru CVs asap
To find out more about this opportunity:

Date:	20 December 2010
Company:	Perfect Bore Manufacturing Ltd
Details:	As a bore production specialist, our client specialises in undertaking the first stage machining operations on many varied components in exotic materials for the aerospace, oil and gas, defence and commercial sectors. An opportunity has now arisen for a skilled CNC Turner to join their team in Andover. In this role you will be responsible for machining large diameter components up to 3M in length, using Fanuc. To be considered for this position, you must be an experienced CNC Turner with a track record of setting and programming in Fanuc. Previous experience of operating Puma 400/600s would be of a distinct advantage, as would experience working with large billets. Up to £14.00 per hour DOE Plus Pension, 28 Days’ Holiday
To find out more about this opportunity:

Date:	20 December 2010
Company:	Cube Precision Engineering
Details:	CAD/ CAM Engineer You will be involved in creating and modifying CAD models using Delcam’s Powershape. You will have experience of press tooling and also be comfortable working in a dynamic environment that works exclusively on bespoke projects. Specialising in large capacity press/mould tooling and CNC machining for the Aerospace, Automotive and Rail industries, you will have experience in dealing with customers and taking their requirements through to manufacture stage. You will also have experience in managing staff to ensure that your designs are manufactured to your specification. An ability to make good design decisions with regard to manufacturing processes, material ion and design for manufacture are important. Additionally, proven practical machine shop skills would be an obvious advantage, with experience in both manual and CNC milling machine operation for the generation of various parts. You will ideally possess the following: - Experience of using a Delcams PowerShape and PowerMill Package. - Practical machine shop skills - Experience of using CAD/CAM software and CNC machine operation - Strong attention to detail - Excellent written and verbal communication skills Suggested Hourly rate £11 – £13.50 Depending on experience.
To find out more about this opportunity:

Date:	20 December 2010
Company:	PPSI Manufacturing
Details:	Urgently required: CNC Programmer / Operators for 2 - 5 Axis Turning, 3 - 5 Axis Vertical Milling, 4 - 5 Axis. CNC Horizontal Boring. Latest Technology Machines: Mazak, Toshiba, Doosan. Mazatrol, Fanuc & Heidenhain CNC systems. Good Rates of pay, plenty of overtime.
To find out more about this opportunity:

Date:	20 December 2010
Company:	PPSI Manufacturing
Details:	Experienced CNC Estimating Engineer for light - heavy latest technology 2 - 5 Axis CNC Machine Shop. Experience with CAD CAM + DELCAM an advantage
To find out more about this opportunity:

Date:	20 December 2010
Company:	Flann Microwave Ltd.
Details:	CNC Millers - Programmer, Setter operator. Fanuc control + EdgeCAM. High precision small batch components. CNC Turners - Fanuc and Mazak + EdgeCAM. High precision small batch components. Permanent positions - 4 day week
To find out more about this opportunity:

Date:	20 December 2010
Company:	Power Fin Technology Limited
Details:	We are seeking an experienced mechanical Tool Maker. The Role: The ideal candidate will be required to manufacture, assemble and maintain new and existing bespoke press tools. The manufacturing of precision machined components for custom built machines will also be a requirement. The Person: You will have a solid mechanical engineering background, and will have previous experience in press tool making & CNC milling/lathe machine operation. You will be able to work to engineering detail drawings, and will ideally have previous experience in the assembly of special purpose machinery and its component parts. Experience in working as part of a team within a tool room environment would be a distinct advantage. Hours: Mon-Fri, full time, 39 hour week. Salary/hourly rate: To be negotiated, depending on experience/qualifications.
To find out more about this opportunity:

Date:	20 December 2010
Company:	Amtek Precision Engineers Ltd
Details:	CNC Programmer / Operator, experience using any of the following would be of interest: Mikron, Mazak, Hurco, Agie, Charmilles. Working knowledge of Delcam and Solidworks software plus 5 axis experience would also be of interest, better still if invloved with injection mould manufacture. Basic week 39 hours plus overtime on regular basis. Pay including O/T and according to experience up to £28,000 pa
To find out more about this opportunity:

Date:	20 December 2010
Company:	Innova Design and Build Ltd
Details:	CNC Machinist / Scheduler Innova is a small innovative precision engineering company specialising in machining small batches of complex components direct from solid models. Job Description Experienced CNC Machinist, programming and setting. Assist with the scheduling of workload across available machines and monitoriung progress to acheive maximum efficiency. Mentor and develop less experienced machinists. Work as part of a team to ensure quality and develop company. Skills required CNC Machining Computer skills Ability to communicate effectively Organised and professional approach Flexible in attitude Forward thinking This role would suit an ambitious machinist looking to develop their role and increase their responsibilities.They must like working as part of a team, like a challenge and making a difference.
To find out more about this opportunity:

Date:	20 December 2010
Company:	UK Precision Ltd
Details:	Experienced miller for sub-contract engineering company. Immediate temporary position until early February 2011. Experience of XYZ Prototrac milling desirable. 39 hour week with overtime normally available. Pay dependant on experience.
To find out more about this opportunity:

Date:	20 December 2010
Company:	ATI Stellram Ltd
Details:	Skilled, time served CNC TURNER working on small batch production of cutting tools using PUMA and NAKAMURA CNC Millturn. 37.5 Hrs per week, three shift system, pension and private health
To find out more about this opportunity:

Date:	20 December 2010
Company:	Stephenson Precision
Details:	CNC lathe operator, conversant in ISO and Mazatrol, 38.75 hours per week competitive wage working a 2 shift system . Please contact for more information
To find out more about this opportunity:

Date:	20 December 2010
Company:	LINCREAL PRECISION ENG LTD
Details:	We are looking for a CNC turner who can program,set and operate cnc lathes with FANUC controls. we operate 39 hrs a week with the potential of shift/overtime. Please contact for more info
To find out more about this opportunity:

Date:	16 December 2010
Company:	Micron Engineering
Details:	We are looking for a CNC Machinist who can operate Fanuc controls and Siemens inc Shopmill/Milling Machine role. The position is 40 hrs a week Mon - Fri, poss overtime. Role involves programming and operating. For more info contact us
To find out more about this opportunity:

Below details individuals looking for employment entered above:

Date:	29 January 2012
Location:	uk
Details:	CNC apllications engineer role required,training,best practice,support,turnkey projects etc - time served etc
To find out more about the individual above:

Date:	11 November 2011
Location:	newcastle upon tyne
Details:	I have 17 years experience working in engineering, textile, floor engineer and as a centre lathe turner. I havent worked in this sector for 5 years and I am keen to return to this type of work. I am a very quick learner and able to adapt to new technology easily and believe that I would require very little re-training to get my skill sets up to date. I would be very grateful for the opportunity to return to this type of work and become a valuable member of a team.
To find out more about the individual above:

Date:	23 April 2011
Location:	Wolverhampton
Details:	Paul Richards E-mail Proo4u4898@blueyonder.co.uk Tel:-01902 630397 Mobile 07758729618 11 Raymond Gardens, Lyndale Park Estate, Wednesfield, Wolverhampton. WV113JH KEY COMPETENCIES • HND qualified in Computer Aided Engineering. • Programming and component proving out. • Team Player, Good communicator, Self motivated, Focussed with attention to details • Drive and enthusiasm, Organised - Keen and willing to learn – Flexible and Practical • Sense of humour - Hard working. Self motivated and disciplined to achieve results • Good problem solving abilities and team building skills. • 30 years experience in Manufacturing within an Engineering Environment • Extensive experience in CAD/CAM and CNC machining • Prismatic experience on 4 axis Horizontal & 4 axis Vertical CNC Machines. • 5 axis Planer 3 + 2 and five axis simultaneous machining. • 3D Solid model machining on CATIA V5. Unigraphics and Solidworks files. • Solid Model fixture and machine design using Edgecam Part modeller. Last Position Production Engineer /Alphacam CAD/CAM Programmer June 2009 to February 2011. Under contract at Lotus Lightweight Structures in Worcester. Importing Catia V5 Fixture Solid Models. Solid Model Feature Recognition. Solid Model Machine tool Simulation Using AlphaCAM for Verification between Machine tool Part and Fixture. Programming Haas 4 axis, MAZAK 4 axis and MAKA 5 axis Cnc machines. Programming Aluminium Light Weight Structures for Lotus and Aston Martin Lagonda. Experience in using Siemens team centre. Ordering of SECO Tooling. Cycle time reduction on average 50% from previous programs. Training Team Leader 2003 to 2009 (Made Redundant February 28th 2009) Training Team Leader for AlphaCAM.www.planitmanufacturing.co.uk. Extensive experience in CAD/CAM CNC Machining, being responsible for development of material and training for class sizes of up to eight students, on 3 axis, 4 axis Prismatic machining, and 5 Axis 3 + 2 planer machining and simultaneous, together with 5 axis Mill/Twin turret C & Y Axis Lathes on AlphaCAM software. Experience in Machining customer’s precision components and prototypes to Aerospace, Oil, Marine Equipment, Motor Sport, Defence, and in Medical sectors. Constantly liaise and communicate with management at all levels. I have given onsite training courses to the following customers: - MB Aerospace Glasgow - P.W.A Pratt and Whitney Aerospace Dublin - McLaren F1 Racing in Woking Surrey - Goodrich Huyton Merseyside. - Doncaster Aerospace Shrewsbury - Bentley Motors Crewe. Technical Support Engineer January 1999 to 2003 Front line technical support for AlphaCAM, sorting basic 2D queries to complex 3D machining, connecting to customers computers via PC Anywhere using remote technical support. Communicating via e-mail to solve customer’s problems Production Engineer CAD/CAM 1989 to November 1998 Vickers Defence Systems (Rolls Royce), Bilston/Wolverhampton. Now BAE Systems. £240M MOD Bridging Contract. Machining of Large Aluminium fabricated structures to Aerospace tolerances. New product introduction. Component prove out on machine. Ordering of tooling through Walter GB. Fixture design and manufacture. Duties included: - • Designing and constructing CAD models for use in CNC manufacture. • Responsible for generating 2D and 3D N.C. data. GNC Offline CAD/CAM. • Proving out programs/set-ups and manual programming on large Asquith Butler HE5000 4 axis CNC Machine to a value of £1.3M 17.5Metres in X 2.6MetresY 1.5 Metres Z with Renishaw Probes and Head Changing. Siemens 840D Control. Plus Asquith Gantry MDB300 14.8M X 3M Y 1M Z Osai 8600 IWS. Value £750,000. • Managing the DNC system for uploading NC data to CNC machining centres. • Customising cutting tool databases for various materials within the machine shop. Including FV520B Stainless Steel. Providing technical support for cutting method strategy, cutting tool ion, recommended speeds and feeds, and best setups. • ITP CMM with Renishaw Probe for setting up components offline before machining on special jigs that could be loaded straight onto the machine table. CNC Milling machine operator Programmer 1986 to 1989 Forth Engineering (1986 – 1989) Sub-Contract machine shop. Asquith Gantry machines Manual Machine operator large planer miller Joshua Bigwoods (1977 -1986) Apprentice at Joshua Bigwoods (1976 - 1977) QUALIFICATIONS AND PROFESSIONAL DEVELOPMENT Nov 2006 Edgecam Part Modeller. Oct 2004 City & Guilds Stages 1 and 2 Level 4 Certificate in further education teaching. Awarded at Wolverhampton Compton Grange. Oct 2003 The Open University T173 Engineering the Future. Oct 2002 Train the trainer Coventry and Warwickshire Chamber of Commerce. Sep 2001 Vericut Verification and Machine Tool Simulation Software. Oct 1994 HNC Higher National Certificate in Computer Aided Engineering awarded Sandwell College. June 1990 City & Guilds The advanced Certificate in Computer Aided Engineering Dudley College of Technology. Nov 1978 City & Guilds in Mechanical Craft Studies Part 1 and 2 (Full Apprenticeship) First year full time education at Bilston College PERSONAL INFORMATION Marital Status: Married 30 Years, Children: One Daughter, Nationality: British. Driving Licence: Full (Clean). Age 51 Interests: - Local Gym, Computers and DIY.
To find out more about the individual above:

Date:	22 April 2011
Location:	germany
Details:	skills: 10 years expiriences in assembling, dissassembling ,repair and setup of driven tools for CNC lathes and machine centers. since 4year in charge of the service department on one of the leading driven tool manufactures in germany. technical support for customers project management ERP Systems CRM Systems requiert job: suitably my qualifications
To find out more about the individual above:

Date:	14 March 2011
Location:	Grantham, Lincolnshire
Details:	time served miller with 25 years experiance of programming ,setting and operating various cnc milling controls including mazatrol , fanuc non conversational ie iso g code, Heidenhain, ecs , general electric, siemens sinumeric, also very recently mazak matrix intergrex . i am currently an afternoon shift charge hand which my company calls a supervisor responsible for 8 people some skilled some not in a rapid response sub contract environment.
To find out more about the individual above:

Date:	17 February 2011
Location:	Norway
Details:	heidenhain Mikron Heidenhain Gildemeister CTX 410 Gildemeister N.E.F. plus 500 Zayer Heidenhain Alphacam etc.
To find out more about the individual above:

Date:	11 February 2011
Location:	havant
Details:	I worked as a cnc machinist making parts for the airbus.when i was made redundant i put myself through college to learn skills in engineering.i now have a nvq 2 in hand fitting,manuel milling machines and lathes
To find out more about the individual above:

Date:	07 February 2011
Location:	Shropshire/Staffordshire/West-Midlands
Details:	An experienced and apprenticeship trained CNC Engineer with 16 years specialist knowledge in multiple (up to 14 axis) CNC Sliding head machinery using state of the art numerical control systems and supporting CAD/CAM software tools in developing complex, high precision components for the medical, automotive, telecommunications, aerospace, construction, energy management, electrical and architectural hardware. I’m presently working for a sub-contractor specialising in the small turned parts industry machining high precision complex components from all types of materials for most industries. My main duties are CNC/PNC programming using CAD/CAM packages designed by the machine tool manufactures such as SD-editor and geometrix software applications or programming long hand in ISO and TB Deco interface, research and development, time studies, trouble shooting, production planning, tooling, light maintenance, process improvement, program management. I feel at 34 I’m at the next stage in my career to take a step up the ladder into a more demanding technical role with the emphasis in combing my IT skills with CNC machining knowledge to gain greater learning opportunities, My reputation from references that I can supply will reflect my technical ability and show that I’m trust worthy, overly hard working, ambitious, with the drive to deliver on time every time.
To find out more about the individual above:

Date:	13 January 2011
Location:	Herts
Details:	CNC Programmer seeks new challenges. Conversant in Mazatrol, Fanuc, Siemens and Yasnac controls, on two axis lathes through to Mill Turn centres, twelve axis sliding head machines and small vertical machining centres. Over twenty years experience including supervisory and Production Engineering positions within and supplying the Oil, Petro-Chemical, Defence, Medical, Telecoms, Motorsport and Hydraulic Industries
To find out more about the individual above:

Date:	11 January 2011
Location:	Stourbridge West Midlands
Details:	I am a skilled CNC machining centre programmer, setter operator with knowledge of both Fanuc and Heidenhain. I have worked in a sub-contract machine shop and also for a press tool manufacturer as an off line programmer. My most recent position was at a fastener company mainly producing off-line lathe programs using Edgecam.
To find out more about the individual above:

Date:	07 January 2011
Location:	Sheffield
Details:	I am a Production Engineering Contractor An Ex Edgecam Application Engineer, still using Edgecam, offering - CNC Programming Services 5 Axis CNC Programming and application assistance Bespoke Edgecam training Edgecam Post Processor creation Edgecam Automation Production Engineering and Project Management assistance
To find out more about the individual above:

Date:	06 January 2011
Location:	Herts
Details:	CNC Programmer seeks new challenges. Conversant in Mazatrol, Fanuc, Siemens and Yasnac controls, on two axis lathes through to Mill Turn centres, twelve axis sliding head machines and small vertical machining centres. Over twenty years experience including supervisory and Production Engineering positions within and supplying the Oil, Petro-Chemical, Defence, Medical, Telecoms, Motorsport and Hydraulic Industries
To find out more about the individual above:

Date:	05 January 2011
Location:	Somerset
Details:	My current role is managing a busy toolroom within a large production company with around 600 active injection mouldtools. Key duties include: - Supervise 8 employees - Maintain, repair, modify injection mould tools - Design injection mould tools (Solidworks and Visi) - Program CNC M/C tools (Haas, Hurco, Semiens, Protrac) - Produce programs using CAM (Depocam, Pro-toolmaker, NCG CAM and Visi) - Manual machining (EDM, Milling, Turning, Grinding) - Health and saftey managment - Compliance managment - Lean systems (research and implement) Qualifications include: - Adavnce modern appenticship (level 3) - C&G Level 2 Machining - C&G Level 3 Advanced Machining - C&G Part programining - HNC Mechanical engineering (Level 4) - Business managment (Level 5) - Risk assessment management - Managing health and safety - Managing discipline and grievance
To find out more about the individual above:

Date:	04 January 2011
Location:	Worcester
Details:	I have worked for a leading CNC machine tool manufacturer for almost 20 years as firstly an Application Engineer and then an Installation and Demonstration Engineer - I am conversant with Mazatrol, Fanuc and Heinedhain programming. I have installed a large range of Mazak machines and demonstratted them some of these machines included Robotic loading systems
To find out more about the individual above:

Date:	22 December 2010
Location:	Newark
Details:	Production Engineer. 48 years old Two Children Married Home Owner Employment :- Precision Bearing manufacturer Time served apprentice in Welding& Plating ONC & HNC mechanical engineering. Cad Cam user to design Bearing for manufacture on Mazatrol , Fanuc cnc lathes Responsible for Production Requirements. Production Improvements New Business design Work flow organisation Introduction of New machinery Liaise with External Customers Health & Safety Risk Assessment's Breakdown & repairs. Machine Service Contracts
To find out more about the individual above:

Date:	20 December 2010
Location:	WOLVERHAMPTON.
Details:	CNC PROGRAMMER WORKING MAINLY ON COMPLEX MULTI-DIRECTIONEL TITANIUM & ALUMINIUM VALVE BLOCKS. RESPONSIBILITIES INCLUDE PROGAMMING , FIXTUE DESIGN, TOOLING PACKAGES & COSTING OF PROJECTS. TARGET DRIVEN FOR DELIVERY OF FAI APPROVED PARTS AT COST & QUALITY REQUIRED FOR COMPLETION OF PROJECT.
To find out more about the individual above:

Date:	17 December 2010
Location:	Nottingham
Details:	Operated and programmed Mazak, Mori and Nakamura Lathes, looking for new position, currently employed but business is slow, looking for a dynamic company. I am 32 Yrs old and have a RR apprenticeship behind me.
To find out more about the individual above: