Norjon Runs 'Lights-Out' With TaeguTec

Norjon Engineers Ltd moved into a new facility and acquired two new machine tools. It is the
Read More

08/02/2012

Large Vertical Machining Centre from Hurco Gives the Edge

Few contract machinists in Scotland have a modern, vertical machining centre to match the 2,200
Read More

05/02/2012

Star SR-20RIII Slider Cuts Cycle Times

Specifically, the SR-20RIII bar automatic was equipped with a special angle drilling head that has..
Read More

03/02/2012

HAAS CNC machinery is the answer for Vasantha Tool Crafts

Since it was established just 16 years ago, Hyderabad-based Vasantha Tool Crafts Pvt Ltd has grown
Read More

A New Development from TaeguTec Maximises Chip Evacuation

Story added 13 July 2010.

MORE NEWS

Working closely with its customer base, TaeguTec has evolved its AluMill milling series to improve performance and tool life. The new 2 and 3-flute AluPlusMill series for CNC machining aluminium and aluminium alloys has a thicker core than its predecessor to improve speeds, feeds, rigidity and surface finishes.

This new development maximises chip evacuation even when undertaking high speed and high feed cutting. The strengthened core diameter improves rigidity of the cutting edge whilst the enhanced vibration dampening properties compared to the existing AluMill end mill deliver higher productivity levels and improved tool life.

The core diameter works in harmony with an improved gash geometry that minimises cutting edge stress and drastically reduces the potential for the cutting edge to crack and chip. This ensures consistent tool life and performance. Added to the benefits of the improved geometry of the AluPlusMill is the new very finely ground cutter surface. Achieved credit to a newly developed UF10 micro grain carbide structure, this immaculate surface enhances surface finishes, improves wear resistance and swarf evacuation.

The new 2-flute AluPlusMill is available from 1 to 4mm diameter in 0.5mm increments and from 4 to 20mm in 1mm increments. The series has an overall length ranging from 47 to 110mm with a cut length from 3 to 55mm. The 3 flute series is available from 3 to 25mm diameter in 1mm increments with a length of cut from 6 to 75mm and an overall length of 47 to 140mm. Despite the long length of the cutters, rigidity is guaranteed credit to the innovative core and geometry design. This allows customers to comfortably machine at speeds and feeds up to 24,000rpm and 5m/min with impeccable surface finishes. For further details on the new AluPlusMill series, please contact your local TaeguTec representative.

GO BACK