Click ME to close the menu.

Log In to MTD Channels to access your customer cockpit and see content more relevent to you.

Thame Is Set To Grip The Crowds at MACH 2016
Thame Is Set To Grip The Crowds at MACH 2016
Thame Is Set To Grip The Crowds at MACH 2016
Thame Is Set To Grip The Crowds at MACH 2016

Thame Is Set To Grip The Crowds at MACH 2016

Added to MTDCNC by MTDCNC on 11 February 2016

As a leading specialist in the design, manufacture and supply of innovative workholding and automation products, Thame Workholding is promising a host of exciting new innovations for visitors to the forthcoming MACH 2016 exhibition. On Stand 5251, Thame Workholding will be giving a host of intriguing new innovations their MACH debut.

For manufacturers with mill/turn centres, Thame will be launching the new HWR Inoflex 4-jaw concentric and self centring chuck with a through-bore. This exciting new chuck enables the clamping of round, rectangular and geometrical irregular shaped parts. With the addition of a through-bore, the new power chuck is available in sizes from 212 to 315mm with a through bore up to 91mm diameter. Despite offering a clamping force of up to 145kN, the sensitivity of the HWR Inoflex makes it ideal for clamping parts that are sensitive to deformation whilst providing a concentricity precision of 20 microns. The diversity of the Inoflex range from Thame is truly remarkable.

The Long Crendon based company will be offering chucks with the option of manual or power operation and also with or without a through bore. At MACH, the experts from Thame will be keen to demonstrate the benefits and application diversity of the new Inoflex as well as the company's comprehensive range of Samchully hydraulic and manual chucks. With chucks available as closed centre, standard bore, large bore and mega bore options that are available in two, three or four-jaw configurations, Thame will have something for everyone at MACH.

Returning to MACH due to its repeat success at the event will be the Lang ECO-Tower 60. Always a crowd pleaser at MACH, the Eco-Tower 60 is a compact system with a small footprint that can deliver automation to any machining centre. At MACH, Thame will be running a promotional offer that will make this system too good to miss. With a low purchase and operation cost and a functionality that makes the Eco-Tower very easy to use, its no surprise this Lang system attracts the crowds at MACH.

The ECO-Tower enables the customer to select manual or automated production; and with just two G-Codes required to communicate between the tower and the machine tool, the ECO-Tower 60 is the epitome of user friendly flexible automation. The tower can accept either 45 or 60 pallets, each with a maximum capacity of 30kg and a generous dimensional limit of 350 by 200 by 200mm. Furthermore, with pallets configured to the Lang zero point system, precision, repeatability and reduced set-up times are just a few of the benefits. With a wide variety of flexible automation systems available from Thame, visitors to MACH that are keen to make their first foray into automated production, should make the Thame stand their first port of call at the show.  

For machine shops aiming to maximise the capabilities of their machining centres, Thame Workholding will be introducing the new Samchully line of 4th and 5th axis rotary tables. Extremely precise, fast, rigid and also offering exceptional clamping forces, the new line-up can be configured to virtually all machining centres to offer cost effective 4th and 5th axis capability. Available with a range of options, the 4th axis variations include a standard rotary table, a large bore NC, a hydraulic rotary table or a multi-spindle table. The 5th axis variants offer a tilting NC rotary table, a multi-spindle tilting rotary table and also a rear mounted motor NC rotary table.

Last but not least Thame will display an extensive range of their UK produced TEC Chuck Jaws in standard and special format and their own Powerpull Bar Puller and Trueborer. With extensive workholding and automation systems on show at MACH, plus experts that can discuss your specific needs, please visit Stand 5251 at MACH 2016 to find out more.

Building Location