Click ME to close the menu.

Log In to MTD Channels to access your customer cockpit and see content more relevent to you.

Renishaw new REVO multi-sensor 5-axis CMM
Renishaw new REVO multi-sensor 5-axis CMM

Renishaw new REVO multi-sensor 5-axis CMM

Added to MTDCNC by Renishaw plc on 09 December 2015

Renishaw is pleased to announce the launch of REVO-2, a new improved version of the revolutionary multi-sensor 5-axis measuring head for use on co-ordinate measuring machines (CMMs). REVO-2 and its new CMM controller UCC S5, build upon the successful REVO multi-sensor system with enhanced power and communications capability to carry the latest REVO sensors such as the RVP vision measurement probe. The head also has an increased range of movement in the negative A-axis which can improve part access and reduce the complexity of stylus setups.


REVO-2 incorporates Renishaw’s own ATOM™ optical incremental encoder system that uniquely combines miniaturisation with ruggedness and exceptional metrology performance. ATOM is the world’s smallest readhead using filtering optics. It offers speeds up to 20 m/s (29,000 RPM on a 17 mm disc) and resolutions to 1 nm (0.004 arc second on a 108 mm disc) with a range of linear and rotary (angle) scales available in stainless steel and glass.


REVO-2 is the only scanning system for CMMs that simultaneously controls the motion of three machine and two head axes whilst collecting workpiece data using its range of 2D and 3D tactile probes, surface roughness measurement probe and now non-contact vision probe too. The head’s novel design incorporates sophisticated laser measurement and electrical signal transmission technology for precise workpiece measurement at extremely high rates of data capture. The five-axis control system removes most of the unwanted dynamic errors associated with machine movement because the measuring head performs most of the work.  As the head is much lighter and more dynamic than the CMM, it is able to quickly follow changes in the part geometry without introducing harmful dynamic errors. The REVO-2 multi-sensor system is managed by the same I++ DME compliant interface as the original REVO product.


In recognition of the revolutionary 5-axis measuring technology that has brought dramatic benefits to part inspection on CMMs, the REVO system has received multiple prestigious awards.


From 5th – 10th October 2015 at EMO 2015, visitors will be able to see the new REVO-2 system demonstrated by Renishaw in hall 5, stand D15.


For further information, visit www.renishaw.com/cmm.

Building Location