Click ME to close the menu.

Log In to MTD Channels to access your customer cockpit and see content more relevent to you.

XYZ 1510VMC Machining Centre

XYZ 1510VMC Machining Centre
XYZ 1510VMC Machining Centre
X Travel   -   1500mm
Y Travel   -   604mm
Z Travel   -   600mm
Table Size   -   1600mm x 600mm
Spindle Centre to Column   -   650mm
Spindle to Table   -   140-740mm
Rapid Feeds (X Y Z axis)   -   16M/min
Cutting Feeds   -   1-16000mm/min
Maximum Table Load   -   1200 Kgs
Positioning Accuracy   -   + 0.005mm (Repeatability + 0.002mm)
T Slot Size   -   18mm
T Slots (Number & Pitch)   -   5 @ 100mm
Spindle Speed   -   60-8000 rpm
Spindle Motor Maximum Rating   -   16Kw
Spindle Motor Duty Cycle   -   11Kw
Spindle Taper   -   BT40 (MAS403 Type 1 Pull Studs)
Tool Changer   -   24 Station Arm Type (pre-s next tool)
Tool Change Time   -   2.5 sec
Maximum Tool Diameter   -   80mm (see note below)
Maximum Tool Weight   -   7 Kgs
Maximum Tool Length   -   300mm
Coolant Pump   -   0.38Kw
Coolant Tank Capacity   -   200 L
Halogen Light   -   24 V (70 w)
Ballscrew Diameter (Grade C3)   -   40mm (P.10)
AC Digital Servo Motor Power   -   3.3Kw
AC Digital Servo Continuous Torque   -   10.5Nm @ 3000rpm
Machine Weight   -   9000 Kgs
Footprint   -   4200 x 2600 x 2600mm (approx)
Minimum Access Height   -   2375mm
Note: Tool diameters can be increased by leaving adjacent pockets vacant.
Important Machine Standard Features
Built from solid cast iron for maximum rigidity
All are laser calibrated & ball bar tested
Full CE approval and certification
Rigid induction hardened & ground box-guide ways
Siemens Shopmill conversational programming system with all options
UK SPECIFICATION Siemens AC digital drives, motors and control
60-8000 rpm spindle with programmable orientation
Flood coolant
High pressure coolant wash down
Spindle air blast
Swarf collection tray on castors
Steel concertina guards on all axis
Automatic lubrication system controlled by NC with filtered return to tank
Full splash guarding with single wide opening interlocked door


  • TV
  • NEWS
  • USED
Building Location