LOGIN
Click ME to close the menu.

Log In to MTD Channels to access your customer cockpit and see content more relevent to you.

Renishaw Probe Head- PHS1

Renishaw Probe Head- PHS1
Renishaw Probe Head- PHS1

PHS1 is designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

The PHS1 servo positioning head features continuous servo drive in two axes, enabling the probe configuration to be positioned at almost any angle.

The PHS1 head is not locked into position in the same way as a PH10 PLUS indexing head. Instead it is driven to approximately the required position and, when a probing point is taken, the axes of the head latch simultaneously with the axes of the CMM to give accurate measurements.

The PHS1 head is controlled directly from an interface card in the CMM controller. Full information is given in the PHS1 programmers' guide.

A range of different probes can be fitted and automatically exchanged. These include touch-trigger probes, contact scanning probes and optical measurement probes.

Extra long extensions allow the Renishaw trigger probes to reach normally inaccessible features.

The head is protected by a built-in overtravel protection unit which signals the machine to stop in the event of a collision.


ALSO ON MTD CHANNELS...

  • TV
  • NEWS
  • USER STORIES
  • SPECIAL OFFERS
  • EX DEMO
  • USED
  • NEW TECHNOLOGY
Building Location