Click ME to close the menu.

Log In to MTD Channels to access your customer cockpit and see content more relevent to you.

Air Turbine Spindles Face Mask milling at constant 40,000 rpm

In this video ITC are milling mild steel at 40,000RPM using a 3 Flute 6mm ball nose end mill, advancing 200 IPM with a 0.005" depth of cut.

The finish quality was better than a 32 Ra and the production time was less than 1/4 the cycle time at 10,000 RPM by the standard spindle. The governed constant high speed 650 eliminated secondary polishing processes and cut down on manufacturing expense.

If your application needs speeding up talk to ITC about these Air Spindles..enquire here

Building Location